EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
3D bosib chiqarish uchun Inconel718 nikel asosidagi kukun
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio.
It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Tavsif
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio. It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Umumiy ma'lumot
| Kelib o'rni: | Changsha, Xitoy |
| Tovar: | HLPOWDER |
| Mavzu: | Inconel718 |
| Zarrachalar hajmi: | 15-53մ |
| sertifikatlash: | ISO9001, ISO14001 |
| Minimal Buyurtma miqdori: | 20kg |
| Qadoqlash Tafsilotlar: | Temir bochka |
| Yetkazish vaqti: | 7-10 kun |
ilovalar
● Aerokosmik
● Energetika
● Avtomobilsozlik
● tibbiy moslamalar
● Sanoat va mexanik komponentlar
Texnik xususiyatlari
GH4169 (Inconel718):
| buyum | C | SI | Mn | Ni | Cr | Co | Mo | Al | Mg | Ti | Nb | P | S | Fe |
| GH¢4169 | ≤0.08 | ≤0.35 | ≤0.35 | 50.0-55.0 | 17.0-21.0 | ≤1.0 | 2.8-3.3 | 0.2-0.8 | ≤0.01 | ≤0.3 | 0.65- 1.15 | ≤0.015 | ≤0.015 | Balli |
Parcha hajmi:
| Zarrachalar kattaligi | Tegish sezgirligi | Oqimlilik | Zarralar hajmini taqsimlash | ||
| D10 | D50 | D90 | |||
| 15-53մ | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Qismning xususiyatlari:
| Qismlar zichligi (g/sm³) | ≥8.18 |
| Chop etilgan(xy) | |
| Kuchlanish kuchi (MPa) | ≥1050 |
| Hosildorlik kuchi (MPa) | ≥750 |
| Cho'zilish A10 (%) | ≥22 |
| Qattiqlik HV/HRC | ≥280 HV5/15 |
Kukunning xususiyatlari
● Yuqori sharsimonlik va yuqori oqimlilik
● Kam kislorod miqdori
To'plam
3D chop etish uchun: har bir PE paketi + 20 kg bankalar yoki 25 kg/50 kg li barrel yoki 250 kg li barrel.
