EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
3D bosib chiqarish uchun 430L zanglamaydigan po'latdan yasalgan kukun
430L stainless steel,its high chromium content (approximately 16-18%) and low carbon content (not more than 0.15%). It offers good corrosion resistance and heat resistance, as well as some oxidation resistance. The heat treatment process for 430L stainless steel typically includes solution annealing, which helps to improve its mechanical properties and corrosion resistance.
Tavsif
430L stainless steel,its high chromium content (approximately 16-18%) and low carbon content (not more than 0.15%). It offers good corrosion resistance and heat resistance, as well as some oxidation resistance. The heat treatment process for 430L stainless steel typically includes solution annealing, which helps to improve its mechanical properties and corrosion resistance.
Umumiy ma'lumot
| Kelib o'rni: | Changsha, Xitoy |
| Tovar: | HLPOWDER |
| Mavzu: | 430L |
| Zarrachalar hajmi: | 15-53μm/ 15-45μm |
| sertifikatlash: | ISO9001, ISO14001 |
| Minimal Buyurtma miqdori: | 20kg |
| Qadoqlash Tafsilotlar: | Temir bochka |
| Yetkazish vaqti: | 7-10 kun |
ilovalar
● Avtomobilsozlik sanoati
● Qurilish sanoati
● Biotibbiyot sohasi
● Elektrotexnika va elektrotexnika sanoati
● Sanoat dizayni
Texnik xususiyatlari
Kimyoviy tarkibi:
| Alloy | Cr | Si | Mn | C | Fe |
| 430L | 16.0-18.0 | ≤0.75 | ≤1.00 | ≤0.12 | Balli |
Note: Other 3D printing powders are available upon any customize
Talablar.
Parcha hajmi:
| Zarrachalar kattaligi | Tegish sezgirligi | Oqimlilik | Zarralar hajmini taqsimlash | ||
| D10 | D50 | D90 | |||
| 15-45մ | ≥4.5 | ≤20 | 15-22 | 26-35 | 46-55 |
| 15-53մ | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Note: Other 3D printing powders are available upon any customize
Talablar.
Kukunning xususiyatlari
● Yuqori sharsimonlik va yuqori oqimlilik
● Kam kislorod miqdori
● Azot bilan gaz atomizatsiyasi
To'plam
3D chop etish uchun: har bir PE paketi + 20 kg bankalar yoki 25 kg/50 kg li barrel yoki 250 kg li barrel.
